Quality:
Competence:
Quality & competence:
Maintanance and tests of stationary CO2 fire-extinguishing systems
5
5
5
Maintanance and tests of stationary CO2 fire-extinguishing systems - 1
Maintanance and tests of stationary CO2 fire-extinguishing systems
We carry out examinatoin, tests and maintanance of stationary CO2 fire-extinguishing
systems of high and low... More
We carry out examinatoin, tests and maintanance of stationary CO2 fire-extinguishing systems of high and low-pressure. Upon completion of the check, we issue an original examination certificate.
All checks dealing with stationary CO2 fire-extinguishing systems are carried out in accordance with manufacturer's instructions and regulattory documents MO MSC.1/Circ.1318 and MSC/ 1/Circ. 1432.
All checks dealing with stationary CO2 fire-extinguishing systems are carried out in accordance with manufacturer's instructions and regulattory documents MO MSC.1/Circ.1318 and MSC/ 1/Circ. 1432.
Service code:5013106100
Price:Up for discussion
Description
We carry out maintanance and tests as follows:
- Manually weight the cylinder content with the help of liquid level indicator
- Visually inspect all cylinder valves
- Check and re-tighten cylinder supports and HP hose connections
- Renew HP hoses if they are more than 10 years
- Visually inspect the manifold. Test it for leakage, by applying dry actuating air
- Visually inspect and test the main valve and distribution valves for operation
- Visually inspect and test remote release system
- Check and test at maximum working pressure start-up lines for leakage and blockage
- Check, service and adjust if necessary manual pull cables and starter cordes
- Scavenge distribution pipes and nozzles, by applying dry actuating air
- Inspect all doors, hinges and locks
- Inspect all instructions and warning signs
- Carry out pressure tests of 10% of main cylinders and pilot cylinders (every 10 years)
- Renew all flexible hoses and visually inspect shut-off valves in manifold (every 10 years)
- Pressure test of the manifold
- Pressure test of the main valve and distribution valve
- Pressure test of the start-up and distribution lines
